Product Description

The Mine MI-MW01 Microwave Test Bench Klystron Based X Band are precision made microwave systems, which

use standard type rectangular wave-guide components to illustrate the essential elements of this field for study.

Instruments & Components:

• Digital Klystron Power Supply (MI-MC01)-1No.
• Digital VSWR Meter (MI-MC03)-1No.
• Cooling Fan 1 No.
• Detector Mount 1 No.
• Fixed Short 1 No.
• Frequency Meter Analog 1 No.
• Isolator 1 No.
• Klystron Mount without Tube 1 No.
• Klystron Tube 1 No.
• Matched Termination 1 No.
• Movable Short 1 No.
• Slide Screw (SS) Tuner 1 No.
• Slotted Section with probe carrage 1 No.
• Tunable Probe 1 No.
• Variable Attenuator 20dB 1 No.
• Waveguide Stand 3 Nos.

Accessories

• Cable BNC (M) to BNC (M) 1 Meter 2 Nos.
• Mains Cord 1.5 meter 2 Nos.
• MIC 1 No.
• Earphone 1 No.
• Fasters (Brass Fly, Nut- Screw set) 1 No.
• Operating Manual 1 No.

Klystron Power Supply MI-MC01

• Beam Supply
• Voltage : 200 - 450 VDC, Variable
• Current : 50 mA
• Repeller Supply : -10 V to -270 V DC Variable
• Filament Supply : 6.3 VDC
• Over-Load Trip Current : 50 mA
• Modulation : AM (Square) FM (Saw - tooth)
• Frequency Range : 500 - 2000 Hz, 50 - 150 Hz
• Amplitude : 0 - 110 Vpp, 0- 60 Vpp
• External : Through External Modulating Signal

Digital VSWR Meter MI-MC03

• Display : LCD (16 X 2)
• Sensitivity : 0.1 V for 200 ohm input impedance
• Noise Level : Less than 0.02V
• Atten. Range : 0 60dB in 10dB steps
• Input : Un-biased low and high impedance crystal biased (200ohm and 200Kohm)
• Display : SWR Scale, dB Scale, Modulation
• Frequency, Power Bar Graph
• Modes : Normal, Audio, PC-Interface
• Gain Control : Adjust the reference level, variable range 0-10dB (Approximately)
• Input Connector : BNC (F)
• Input Frequency : 1 KHz ± 10
• Power : 230 Volts AC ± 10%, 50Hz
• Digital display for : Beam voltage, Beam Current, Repeller voltage
• Modulation Selector : CW/AM/FM/Mic/PC/EXT
• Meter Selector : Beam Voltage (V)/ Current (I)/(Repeller) Rep.
• Connectors : 5-Pin Metal Connector, BNC for External Modulation
• (Optional: RS-232 for PC Interface)
• Power Supply : 230 VAC ±10%, 50 Hz